MGR-SCR Series
Voltage Power Regulator

MGR-SCR Series Voltage Power Regulator

[All the information on this website is for reference only, and the actual product and the accompanying product manual shall prevail. If you have any questions, please contact webmaster@huimultd.com]

Introduction


MGR-SCR Series Three Phase Power Regulator (also known as three-phase thyristor voltage regulator, three-phase power SCR voltage regulator, or three phase thyristor power controller), uses three sets of anti-parallel (back-to-back) Power SCRs as output components to regulate the power of the three-phase load through Phase Control (Conduction Angle Control). To meet the different needs of users, we offer two type of products: the MGR-SCR3_LA series (Basic Type) has the basic three-phase voltage regulation function; the MGR-SCR_LAH series (Professional Type) has full functions, such as three-phase voltage regulation function, multi-function LED status indicator, overheat protection function, fast fuse, output range adjustment (maximum output value and minimum output value are all adjustable). Depending on the load current, the MGR-SCR_LAH series can be also divided into the Low Power Version (L-Power) and the High Power Version (H-Power). The L-Power version is for low power loads; the H-Power version is for high power loads. The basic type (MGR-SCR_LA Series) has no fast fuse (quick-blow fuse), no overheat protection, no heat sink and air-cooled fan by default, but can be equipped optionally. The multi-function type (MGR-SCR_LAH Series) is equipped with high power air cooling fan, heat sink, fast fuse and temperature control device by default.

How to order


How to order MGR-SCR Series Voltage Power Regulator

MGR (Three Phase Power Regulator)
  - [Option] {SCR3 (Basic); SCR (Professional)}
  - [Rated Current]
  - [Option] {LA (Basic); LAH (Professional)}

Parameters


MGR-SCR3_LA Series img

MGR-SCR3_LA Series

Control Signal:  E: CON 0~5V; F: CON 0~10V; G: CON 4~20mA
Power Voltage:  Power regulator--three phase, 380VAC (three-phase four-wire); Air cooled fan--220VAC
Voltage Frequency: 50Hz/60Hz
Output Mode:  Phase output
Load Current:  25A, 40A, 80A, 100A, 120A
Operating Environment: Ambient temperature below 45 °C, ambient humidity below 90% RH
Dimensions & Mounting:  Overall Dimension: see F1; Installation Dimension: see F2; with heat sink and air cooled fan

MGR-SCR_LAH Series (L-Power) img

MGR-SCR_LAH Series (L-Power)

Control Signal:  E: CON 0~5V; F: CON 0~10V; G: CON 4~20mA
Power Voltage:  Three phase, 380VAC (three-phase four-wire)
Voltage Frequency: 50Hz/60Hz
Output Mode:  Phase output
Load Current:  40A, 65A, 75A, 90A, 100A, 120A
Protection Function: Fast fuse
Operating Environment: Ambient temperature below 45 °C, ambient humidity below 90% RH
Dimensions & Mounting:  Overall Dimension: see F1; Installation Dimension: see F2; with heat sink

MGR-SCR_LAH Series (H-Power) img

MGR-SCR_LAH Series (H-Power)

Control Signal:  E: CON 0~5V; F: CON 0~10V; G: CON 4~20mA
Power Voltage:  Three phase, 380VAC (three-phase four-wire)
Voltage Frequency: 50Hz/60Hz
Output Mode:  Phase output
Load Current:  150A, 200A, 250A, 300A, 400A
Protection Function: Over temperature protection
Operating Environment: Ambient temperature below 45 °C, ambient humidity below 90% RH
Dimensions & Mounting:  Overall Dimension: F1; Installation Dimension: F2; with heat sink and air cooled fan

Features


MGR-SCR3_LA Series

● Linear phase-shift control circuit with good stability and high precision
● Vacuum welding technology with good quality and long service life
● Modularization with high pressure resistant, safer and more reliable
● Miniaturization with convenience for installation, wiring and etc.

MGR-SCR_LAH Series

● Multi-function LED status
● Built-in fast fuse protection function
● Adjustable maximum output and minimum output
● Linear phase-shift control circuit with good stability and high precision
● Modularization with high pressure resistant, safer and more reliable .
● Over temperature protection function (H-Power)
● Innovative structure with high efficiency and high quality (H-Power)

Dimensions and Circuit Wiring Diagram


MGR-SCR3_LA Series Voltage Power Regulator

MGR-SCR3_LA Series Voltage Power Regulator Basic Diagram

Basic

MGR-SCR_LAH Series Voltage Power Regulator

MGR-SCR3_LAH Series Voltage Power Regulator Professional, L-Power Diagram

Professional, L-Power

MGR-SCR3_LAH Series Voltage Power Regulator Professional, H-Power Diagram

Professional, H-Power

Application


● Applications that need three phase voltage adjustment.

Precautions and FAQs


MGR-SCR3_LA Series

● The input circuit of the main circuit adopts three-phase four-wire connection, no phase sequence requirement.
● SCR is a high current component, so please be sure to tighten the (A1, B1, C1) and (A2, B2, C2) terminals, otherwise it will heat up the terminals and then burn out the SCR.
● When the three-phase load adopts the Y-connection method, the neutral point of Y must be connected to the neutral line; if the neutral point of Y is not connected to the neutral line, the three-phase load needs to be relatively balanced.
● When the module is used for the load with load power greater than 15 KW, it is recommended to use a suitable heat sink, and apply thermal grease between the heat sink and the SCR backplane, as well as cold air to cool down.
● Module protection: Please use the semiconductor high speed fuse to protect the load and module from overcurrent.
If the operating power is greater than 15KW, be sure to equip a high power air-cooled fan.

MGR-SCR_LAH Series

● The input circuit of the main circuit adopts three-phase three-wire connection, no phase sequence requirement.
● SCR is a high current component, so please be sure to tighten the (R, S, T) and (U, V, W) terminals, otherwise it will heat up the terminals and then burn out the SCR.
● SCR has a built-in fast fuse for overcurrent and short-circuit protection. If the fuse is blown due to overcurrent, be sure to replace it with a fuse of the same specification. Please do not increase Amps of the fuse arbitrarily!
● If the load adopts Y-connection, the neutral point cannot be connected to the neutral line, otherwise the SCR will lose control.
● If the load power is too high or the heat dissipation is not good, consider air cooling device to cool down the module.
● When the heat sink temperature exceeds 75 °C, the over-temperature protection will be automatically turned on and stop the module from working. At this time, only the power status LED is lit.
If the operating power is greater than 15KW, be sure to equip a high power air-cooled fan.                            

All Regular Models We Offer


● MGR-SCR3_LA Series (Three Phase, Power SCR, Basic Type)

Load Voltage Three Phase 380VAC (three-phase four-wire), Simple Function

● MGR-SCR_LAH Series (Three Phase, Power SCR, Professional Type)

Load Voltage Three Phase 380VAC (three-phase four-wire), Full Function, L-Power

  • MGR-SCR40LAH
  • MGR-SCR65LAH
  • MGR-SCR75LAH
  • MGR-SCR90LAH
  • MGR-SCR100LAH
  • MGR-SCR120LAH

Load Voltage Three Phase 380VAC (three-phase four-wire), Full Function, H-Power

  • MGR-SCR150LAH
  • MGR-SCR200LAH
  • MGR-SCR250LAH
  • MGR-SCR300LAH
  • MGR-SCR400LAH

(E type: CON 0-5V; F type: CON 0-10V; G type: CON 4-20mA)

*Customized models are available, be free to contact us.

Tips

1) When selecting the rated current of the solid state relay/solid state module, please consider the corresponding Derating Factor.
2) You can visit Blog - Resource to view and download files.
3) You can visit Products to view and learn about other products.
4) You can visit Information to view and learn about solid state relays/solid state modules knowledge.
5) You can also visit Help, or Contact us to get more support.




  Get in touch with us now!


Please take a minute or two to complete this simple form to get reply in 24 hours, thank you!

*Please check the trash box of your mailbox, if you do not receive our email.