• Telephone0086-‭0577-62698923‬
  • E-mailsales@huimultd.com
  • AddressNo.266 Liujiang Road, Wenzhou, Zhejiang, China
Mailbox Linedin Facebook Twitter
Product name:Solid State Heat Sink

Product overview:

The material of the mager MGR heat sink is usually aluminum heat sink. According to the dimension of the mager MGR solid state relay and the heat dissipation conditions, choose the appropriate heat sink. If you want to improve the heat sink performance, you can use the combination of high temperature heat sink and air cooled fan.
Click to enlarge the dimension diagram drawing.

Content us Return list Download PDF

Product introduction



SOLID STATE HEAT SINK



MG-F SERIES HEAT SINK
● Model: F-150
● Length×Width×Height: 120×105×93
● Application: 1.Suitable for three phase solid state relays, and the actual load current (sum of three phases) is not more than 120A 2.Suitable for rectangular solid state relays or long strip industrial solid state relays, and the actual load current is not more than 120A

Diagram - heat sink MG-F

After installing the fan, the length of the heat sink needs to be increased by 32mm. The actual load current should be calculated after installing a cooling fan (thickness 32mm*length 92mm*width 92mm) at one end of the MG-F series heat sink.



MG-H SERIES HEAT SINK
● Model: H-150
● Length×Width×Height: 150×80×80
● Application: 1.Suitable for three phase solid state relays, and the actual load current (sum of three phases) is not more than 75A 2.Suitable for rectangular solid state relays or long strip industrial solid state relays, and the actual load current is not more than 35A

Diagram - heat sink MG-H

After installing the fan, the length of the heat sink needs to be increased by 32mm. The actual load current should be calculated after installing a cooling fan (thickness 32mm*length 92mm*width 92mm) at one end of the MG-H series heat sink.



MG-I SERIES HEAT SINK
● Model: I-50
● Length×Width×Height: 50×60×50
● Application: Suitable for the rectangular single phase solid state relay with the actual load current no greater than 15A

Diagram - heat sink MG-I



MG-L SERIES HEAT SINK
● Model: L-150
● Length×Width×Height: 150×88×35
● Application: 1.Suitable for three phase solid state relays, and the actual load current (sum of three phases) is not more than 20A 2.Suitable for rectangular single phase solid state relays, and the actual load current is not more than 26A

Diagram - heat sink MG-L



MG-T SERIES HEAT SINK
● Model: T-80
● Length×Width×Height: 80×70×80
● Application: Suitable for rectangular single phase solid state relays or long strip industrial solid state relays, and the actual load current is not greater than 26A
● Model: T-110
● Length×Width×Height: 110×70×80
● Application: Suitable for rectangular single phase solid state relays or long strip industrial solid state relays, and the actual load current is not greater than 26A

Diagram - heat sink MG-T



MG-W SERIES HEAT SINK
● Model: W-70
● Length×Width×Height: 70×125×50
● Application: Suitable for the rectangular single phase solid state relay with the actual load current no greater than 20A
● Model: W-100
● Length×Width×Height: 100×125×50
● Application: Suitable for the rectangular single phase solid state relay with the actual load current no greater than 26A

Diagram - heat sink MG-W



MG-Y SERIES HEAT SINK

Diagram - heat sink MG-Y

After installing the fan, the length of the heat sink needs to be increased by 45mm. The actual load current should be calculated after installing a cooling fan (thickness 45mm*length 120mm*width 120mm) at one end of the MG-Y series heat sink.



If you would like more information on this model or other unlisted models, please go to the Resource Page and download the Catalogue. Or contact with us via the form at the bottom of the page.
Click here to know more about Solid State Relay.